Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 3 Flute | 16.0mm
$299.00 NZD
Approx $170.51 USD Excl GST Product Code: 369 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 100
- Flute Length: 40
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 3 Flute | 14.0mm
$249.00 NZD
Approx $141.99 USD Excl GST Product Code: 369 1400
- Diameter: 14.0
- Shank Diameter: 14
- Length: 80
- Flute Length: 35
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 16.0mm
$129.00 NZD
Approx $73.56 USD Excl GST Product Code: 368 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 100
- Flute Length: 40
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 12.0mm
$129.00 NZD
Approx $73.56 USD Excl GST Product Code: 369 1200
- Diameter: 12.0
- Shank Diameter: 12
- Length: 75
- Flute Length: 30
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 10.0mm
$99.00 NZD
Approx $56.46 USD Excl GST Product Code: 369 1000
- Diameter: 10.0
- Shank Diameter: 10
- Length: 75
- Flute Length: 25
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 12.0mm
$89.00 NZD
Approx $50.75 USD Excl GST Product Code: 368 1200
- Diameter: 12.0
- Shank Diameter: 12
- Length: 75
- Flute Length: 30
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 10.0mm
$79.00 NZD
Approx $45.05 USD Excl GST Product Code: 368 1000
- Diameter: 10.0
- Shank Diameter: 10
- Length: 75
- Flute Length: 25
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 8.0mm
$77.39 NZD
Approx $44.13 USD Excl GST Product Code: 369 0800
- Diameter: 8.0
- Shank Diameter: 8
- Length: 60
- Flute Length: 20
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 3 Flute | 7.0mm
$68.70 NZD
Approx $39.17 USD Excl GST Product Code: 369 0700
- Diameter: 7.0
- Shank Diameter: 8
- Length: 60
- Flute Length: 17
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 6.0mm
$60.00 NZD
Approx $34.22 USD Excl GST Product Code: 369 0600
- Diameter: 6.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 15
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 8.0mm
$59.00 NZD
Approx $33.65 USD Excl GST Product Code: 368 0800
- Diameter: 8.0
- Shank Diameter: 8
- Length: 60
- Flute Length: 20
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 5.5mm
$51.30 NZD
Approx $29.26 USD Excl GST Product Code: 369 0550
- Diameter: 5.5
- Shank Diameter: 6
- Length: 50
- Flute Length: 14
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 6.0mm
$49.00 NZD
Approx $27.94 USD Excl GST Product Code: 368 0600
- Diameter: 6.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 15
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
HSS | 4 Flute | 20.0mm
$48.51 NZD
Approx $27.66 USD Excl GST Product Code: 360 2000
- Diameter: 20.0
- Shank Diameter: 20
- Length: 104
- Flute Length: 38
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 5.0mm
$44.00 NZD
Approx $25.09 USD Excl GST Product Code: 368 0500
- Diameter: 5.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 13
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
HSS | 4 Flute | 18.0mm
$43.55 NZD
Approx $24.83 USD Excl GST Product Code: 360 1800
- Diameter: 18.0
- Shank Diameter: 16
- Length: 92
- Flute Length: 32
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 3 Flute | 2mm
$42.61 NZD
Approx $24.30 USD Excl GST Product Code: 369 0200
- Diameter: 2
- Shank Diameter: 4
- Length: 50
- Flute Length: 5
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 3.5mm
$42.61 NZD
Approx $24.30 USD Excl GST Product Code: 369 0350
- Diameter: 3.5
- Shank Diameter: 4
- Length: 50
- Flute Length: 9
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 3mm
$42.61 NZD
Approx $24.30 USD Excl GST Product Code: 369 0300
- Diameter: 3
- Shank Diameter: 4
- Length: 50
- Flute Length: 8
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 4.0mm
$42.61 NZD
Approx $24.30 USD Excl GST Product Code: 369 0400
- Diameter: 4.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 10
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 5.0mm
$42.61 NZD
Approx $24.30 USD Excl GST Product Code: 369 0500
- Diameter: 5.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 13
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 4.0mm
$42.50 NZD
Approx $24.24 USD Excl GST Product Code: 368 0400
- Diameter: 4.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 10
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 4.5mm
$42.50 NZD
Approx $24.24 USD Excl GST Product Code: 368 0450
- Diameter: 4.5
- Shank Diameter: 6
- Length: 50
- Flute Length: 12
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
HSS | 4 Flute | 16.0mm
$40.25 NZD
Approx $22.95 USD Excl GST Product Code: 360 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 92
- Flute Length: 32
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 2.5mm
$39.90 NZD
Approx $22.75 USD Excl GST Product Code: 368 0250
- Diameter: 2.5
- Shank Diameter: 4
- Length: 50
- Flute Length: 6
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 3.0mm
$39.90 NZD
Approx $22.75 USD Excl GST Product Code: 368 0300
- Diameter: 3.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 8
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 3.5mm
$39.90 NZD
Approx $22.75 USD Excl GST Product Code: 368 0350
- Diameter: 3.5
- Shank Diameter: 4
- Length: 50
- Flute Length: 9
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
HSS | 4 Flute | 14.0mm
$35.06 NZD
Approx $19.99 USD Excl GST Product Code: 360 1400
- Diameter: 14.0
- Shank Diameter: 12
- Length: 83
- Flute Length: 26
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 1.0mm
$34.77 NZD
Approx $19.83 USD Excl GST Product Code: 368 0100
- Diameter: 1.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 3
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 1.5mm
$34.77 NZD
Approx $19.83 USD Excl GST Product Code: 368 0150
- Diameter: 1.5
- Shank Diameter: 4
- Length: 50
- Flute Length: 4
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 2.0mm
$34.77 NZD
Approx $19.83 USD Excl GST Product Code: 368 0200
- Diameter: 2.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 5
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
HSS | 4 Flute | 12.0mm
$30.77 NZD
Approx $17.55 USD Excl GST Product Code: 360 1200
- Diameter: 12.0
- Shank Diameter: 12
- Length: 83
- Flute Length: 26
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
HSS | 4 Flute | 10.0mm
$27.21 NZD
Approx $15.52 USD Excl GST Product Code: 360 1000
- Diameter: 10.0
- Shank Diameter: 10
- Length: 72
- Flute Length: 22
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
HSS | 4 Flute | 8.0mm
$17.64 NZD
Approx $10.06 USD Excl GST Product Code: 360 0800
- Diameter: 8.0
- Shank Diameter: 8
- Length: 63
- Flute Length: 19
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
HSS | 4 Flute | 6.0mm
$12.02 NZD
Approx $6.85 USD Excl GST Product Code: 360 0600
- Diameter: 6.0
- Shank Diameter: 6
- Length: 57
- Flute Length: 13
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
